Siny Medical Low Speed Centrifuge for Medical
| Screen | LED DigitalScreen |
| Machine Body | Metal frame |
| Max. Speed | 4000rpm |
| Speed accuracy | ±20 rpm |
| Max. RCF | 3035xg |
| Max Capacity | 6x50ml |
| Timer range | 1~99min |
| Motor | Brushless motor |
| Motor Power | 60W |
| Voltage | AC110~220V, 50Hz, 5A （Can be customized according to different countries） |
| Noise | <55db |
| Net weight. | 22kg |
| Gross weight | 23kg |
Description
Siny medical low-speed centrifuge for medical with numerous fixed-angle rotors. The extensive range of accessories can accommodate tubes from 6 ml to 50 ml, the separation of blood samples in clinical tests, hospital laboratories, beauty salons, dental hospitals, etc.
1. Metal casing. Stainless steel chamber with protective ring. An electronic safety lock prevents the lid from opening during centrifugation. The cover can be opened manually in case of malfunction or emergency. Gas spring to prevent the cover from falling. Small size and lightweight, with high-strength ABS structure, long-lasting and easy to move.
2. Recall the parameters set last time. (Can be used for repeated analyses). Reliable drive system. Brushless motors are maintenance-free. The speed/RCF is adjustable and automatically calculated during operation. Wrong self-diagnosis. Speed holes provide a method of speed detection.
3.ISO13485, CE, and other international standards.
4. Can be customized.
How to extract PRP with a centrifuge？
Step 1: First of all, prepare all the consumables we need in the process of operation, including anticoagulant collection vessels, rubber tubes, disinfectant, cotton swabs, syringes, syringes, long needles, 30G needle fungal gauze, etc.
Step 2: Blood was drawn. Peripheral blood was collected by the conventional blood drawing process, about 10ml, mixed upside down and fully mixed with the anticoagulant in the blood collection tube.
Step 3: For the first centrifugation, put the collecting vessel into a centrifuge, preferably a tilt centrifuge. After increasing the slope, the platelets cover a large area and are easy to extract. The first centrifugal speed was 2500pm. After centrifugation, the blood vessels were taken out. At this time, obvious stratification could be seen, with serum in the upper layer, platelets in the middle, and red blood cells in the lower layer.
Step 4: For the first centrifugation, put the collecting vessel into a centrifuge, preferably a tilt centrifuge. After increasing the slope, the platelets cover a large area and are easy to extract. The first centrifugal speed was 2500pm. After centrifugation, the blood vessels were taken out. At this time, obvious stratification could be seen, with serum in the upper layer, platelets in the middle, and red blood cells in the lower layer.
Step 5: Second centrifugation. The second collection vessel was centrifuged again at 3200RPM for 8min. After centrifugation, the collection vessel was taken out.
Step 6: The remaining approximately PRP is extracted with a 1ml syringe, and the whole extraction process is completed.
FAQs
We are a factory with over 20+ years of experience.
30% T/T in advance, and balance against the documents.
Yes, all accepted.
Our capacity can be 500,000PCS per day.
Yes, Sinymedical has a dedicated customer support team. You can reach them through the contact information provided on their website.
Related products
-
PRP Centrifuge
Table Type Low Speed Centrifuge for PRP Extraction
